The item you're looking for might have been renamed, removed or relocated.
These are page(s) found with similar content.
- Water Cylinder Wrapper Production LineThis line of machinery is capable of producing a 'Completed water cylinder wrapper' of 480mm to 580mm x 686mm to 1942mm long, by means of a two-piece construction from coil.
- Up Down Cobra CurverThis machine is capable of automatic bi-directional curving of 100 to 150mm wide x 8 to 20mm thick mild steel plates into various bi-directional curved shapes at a speed of approximately 5m/min.
- Turbulator Cut Form & Stuffing Production LineThis line of machinery is capable of cutting to length, forming and stuffing a 0.08mm aluminium Turbulator product into a steel sleeve automatically from coil at a production rate of greater than 2000 per hour (based upon a 555mm product). Simple length variation can be achieved between 300 and 800mm.
- TruTool F 301The TruTool F 301 seam locker is the perfect choice if you process sheet thicknesses of 0.45 mm 1 mm mild steel. For straight or curved ducts.
- TruTool F 300You can use the TruTool F 300 seam locker to work in sheet thicknesses of 0.75 mm 1.25 mm mild steel and lock straight as well as curved ducts.
- TruTool F 140The TruTool F 140 seam locker is ideal for mild steel and stainless steel and locks large radii on straight as well as curved ducts. For sheet thicknesses of 0.6 mm 1.4 mm.
- Tensioning Band for ChimneysThe Following machinery will accept pre cut-to-length blanks of 0.5mm stainless steel and form into the tension bands at a speed of 20m/min.
- TeamPersonnel contacts for Boxer Design & Manufacturing team
- Slip On Flange Production LineThis line of machinery is capable of producing three profiles namely- 20mm Slip-on Flange (0.6/0.7) thick, 30mm Slip-On Flange (0.7/0.9) thick, 40mm Slip-On Flange (0.9/1.2) thick from 1000kg coils of galvanised mild steel in cut lengths from 100mm to 5 metres.
- Silencer Sleeve Forming MachineThe following machine is capable of accepting hand fed pre-cut to size blanks of 0.7mm thick stainless steel or 0.5mm thick titanium and automatically forming a pre determined Silencer Sleeve profile at a rate of one every 40s.
- RollformingOur Roll forming machines are generally split into 4 different types. All types provide rapid, continuous production of your cold-formed sheet steel components in any length. Machines can be fed from coil as part of a line or in their simplest form they can be strip-fed or sheet-fed roll formers.
- Ring and Strap MachineProduces two seperate products form stainless steel coil, processes include cropping, punching, no loss shearing, ring rolling and piercing.
- Retainer Ring Production LineThe following line of machinery is capable of producing a 'U' shaped ring from coils of 28.14mm wide x 2mm thick stainless steel at a roll forming rate of 25m/min less stoppage to cut time.
- Rafted & CassetteRafted, cassette or cartridge rollforming machines are ideal where production lines demand rapid tooling change.
- Plain Seam Panel LineThe Plain Seam Panel Line is capable of processing 1250mm wide coils of 0.6 to 0.8mm Plastisol steel, face side up, into up to 7.5 metre lengths of LH, RH or L & R hand plain seamed sheets.
- Picket Section Production LineThis line of machinery is capable of forming the punched and sheared 15mm x 14mm Picket Section Channel in lengths from 470mm to 6000mm from coils of pre slit-to-width 1.2mm mild steel.
- Paper Backed Metal Lath Production LineThe 27 wide lath produced had a strand width of 0.051 with 84/85 diamonds, 17.5mm long approximately.
- Oval Seamed Tubular DuctsThis line of machinery is capable of producing oval seamed Tubular Ducts in cut lengths up to 10m long from pre slit-to-width coils of 0.4mm thick galvanised steel at a rate of 25 m/min less cutting and flaring time i.e. approximately 20 m/min.
- Mill standMill Stand machines are for forming products 60mm high or above. Each pair of top and bottom rollshafts is individually carried on sealed for life ball bearings within the adjustable bearing blocks of the individual cast support stand.
- Metal Lath Production LineThe 2440 long x 700 wide lath produced has a strand width of 1.3mm with diamond size of 20 x 10mm in material gauges from 0.4 to 0.8mm. The production rate of this line is 20 sheets per minute.
- LockformingBoxer manufacture a standard range of lock forming machinery, primarily for the ventilation ducting industry which are used to produce various seams for joining sheet metal.
- Fixed SideplateFixed Sideplate machines provide a durable, cost effective means of roll forming sections up to 60mm high from most metals up to 3mm thick at speeds of up to 35m/min.
- DuplexDuplex machines have twin roll forming heads to provide variable width rolling of double-edged panel products at speeds up to 30m/min.
- Drive Cleat Duct LineThis Drive Cleat Duct Line is a compact straight line machine for forming Drive Cleat profile ducts with a Pittsburgh duct seam.
- ContactBoxer Design & Manufacturing Ltd Unit 2, Boundary Court, Crossley Road, Heaton Chapel, Stockport, SK4 5GA, England
- 22s s cleat & standing s cleatS'Cleat profiles have been designed to complement the Drive Cleat profile as a means of joining the un-formed overlapping edges when making in line duct connections.
- 20s pittsburghThe 20's Pittsburgh rolls are fitted as standard to one side of the 5 stage machine with the option to fit 1 of 3 cnc machined roll sets to the outboard extension shafts.
- 18s button punchThis system is used as a simple joining method to join between 0.5 and 1.2mm sheet steel at right angles and is designed to lock rigidly together without the need for a post seaming operation.
- 16s pittsburghThe 16's Pittsburgh rolls are fitted as standard to one side of the 7 stage machine with the option to fit 1 of 11 cnc machined roll sets to the outboard extension shafts.
- 16s flanging machinesThe Boxer flanging machine is constructed using hardened working components for wear resistance and blackened plates to protect against corrosion. It is housed in a modern powder coated cabinet allowing easy access during operation.