S Cleat & Standing S Cleat Machine

22s Gauge

 
S'Cleat profiles have been designed to complement the Drive Cleat profile as a means of joining the un-formed overlapping edges when making in line duct connections.
 
Both S'Cleats are the same width as the Drive Cleat (28mm) giving a uniform appearance but the Standing S'Cleat has an additional 25 high flange to increase rigidity over long runs.  They can both be formed in mild steel between 0.5 and 0.7mm.
 
The S'Cleat machine has 9 forming stages with outboard extension shafts to both sides giving the option to fit any 2 of 11 roll sets.
 
The Standing S'Cleat machine can either have S'Cleat rolls on single extension shafts or double extension shafts with the option to fit  any 2 of 11 roll sets.
 

Standard Tooling & Tooling Options

 
PROFILE
 
SIZE
Range mm
METAL USED
mm
GAUGE
mm
Standing S'Cleat
28 wide
25 high
136 strip
0.5 - 0.7
S'Cleat
28 wide
92 strip
0.5 - 0.7
Small Pittsburgh
8.5 pocket
22
0.5 - 1.0
Double Seam
Small Double Seam
12.5 seam
10.5 seam
15.5 per edge
12.5 per edge
0.7 - 1.6
0.5 - 1.0
Plain Seam
12.0
12.5
0.7 - 1.0
Standing Seam
19 high
35
1.0 - 1.6
Right Angle Flange
11 high
10
0.7 - 1.6
Drive Cleat
28 wide
54 strip
0.5 - 1.0
Radius Cleat
28 wide
54 strip
0.5 - 1.0
Large Safe Edge
Small Safe Edge
15 return
14
0.7 - 1.6
0.5 - 1.0
3 in 1
16 high
43 - 3 bend
30 - 2 bend
15 - 1 bend
0.5 - 1.0